All of us have been in the unpleasant position of finding that the drain is clogged according to Αποφράξεις Αντωνίου. The water starts to come out, forming a pond, while at the same time there is a bad smell. Nightmare! Fortunately, there is a quick and easy solution! Soda is your ally! Read how to unclog a drain with baking soda and it will be a piece of cake!
Before you can unclog your drain, you must first understand what caused it to clog. Every day, various papers, soaps, hairs, food residues leave the sinks, showers and washing machines to end up in the sewer. The result is that the drain gets clogged and the water has no way out. It’s a very common problem, often due to poor drain construction, something you can diagnose with camera blockages. You, however, will be ready to face it next time!
Use Baking Soda and Vinegar
First, it would be a good idea to put on gloves and try to remove the unnecessary hair and all other debris from the siphon. In this way, your drain will be cleaned even more easily. Then pour half a cup of baking soda into the drain hole, sinks and tub. Next, microwave some vinegar and gradually pour it over the baking soda.
This step must be done very carefully as the vinegar and baking soda combination will begin to foam and cause fumes to come out of the plumbing drain. Let the mixture work for half an hour and immediately after that turn on the tap so that plenty of water runs. In the bathtub it will be better to put the plug to close the outlet and then fill it with water. When you pull the cap, the water pressure will act as a occlude.
Treat the clogged drain with baking soda and salt
If the drain is clogged by various fats or grease, then the blockage of the drain should be done with soda and salt. Mix half a cup of salt with half a cup of baking soda and pour the mixture into the sinks. Let it work for about 20 minutes and then pour a cup of boiling water into each tube. Let it act all night and in the morning pour plenty of water to wash away any residue left from the mixture. Your sinks will be spotlessly clean and ready for use!
Prefer soda and warm water for an easy and quick preventive cleaning
Another way to unclog a drain is with baking soda and hot water. After picking up as much hair as you can using the gloves, put water in a kettle and let it boil. Pour half a cup of baking soda down the drains first, then the hot water.
Let the solution work for a few minutes and then pour plenty of hot water. If the pipes are not too clogged, instead of clogging the drain with baking soda and water, you can put the hot water alone in two doses. This is the easiest and fastest way, but works best on slightly clogged drains or for preventative purposes.
Extra Tips for Effective Clogging with Soda
Avoid commercial products
Unlike drain clogging with baking soda, commercial products usually damage pipes and most of the time don’t do what they promise. In addition, due to the very strong chemicals they contain, they not only contribute to the pollution of the environment but if mixed with soda, the fumes will be very harmful to humans as well.
If the clog persists, use washing soda
If the drains are very clogged, instead of baking soda you can use washing soda which is a stronger cleaner. A necessary condition, however, is that you have not previously poured any commercial preparation.
Don’t neglect drain cleaning
In contrast to clogging, with sewer cleaning, all pipes and wells are unclogged and cleaned, not just the well that was clogged last. In this way, you are sure that the drain will not clog soon, nor will dirty water come out which will contaminate the space. Experts recommend cleaning the drain at least twice a year. One in the spring and one in the fall, before disinfection.
In the event that the drain blockage with soda does not work, the blockage is deeper in the pipes and you will need the help of an experienced plumber.